Join our crew on Patreon! http://www.patreon.com/ruca

Follow us on Facebook, Twitter, and Instagram! @rucasailing

#sailing #sailinglife #travel #vlog

After being offshore, sailing in the blue water on a fast 2 day reach from the USVI to Grenada, we arrive and spend almost a fortnight in quarantine.

In this satisfying video, we do some sailing, but you get to see a lot of us making funny videos while stuck on the boat for over a week at anchor. You know what’s awesome about being at anchor in for that long?

There is no CNN, no MSNBC, no Fox News, no parties, no drama. It’s just the two of us and the asmr sounds of the ocean and birds, Kate playing beautiful music as she is learning the guitar, and enjoying sunsets and nature.

We have a smooth sail and show the checking in the process via MAYAG into Grenada. It was overall a good and motivational experience! (A note, now you need to use SailClear).

The post [Ep. 29] Unplanned Detour – New Stop on Route to Sail Around the World appeared first on Sailing Sweet Ruca.

We want to note that despite the catchy title, we were very impressed by the way the BVI Customs and Immigration team handled the situation. This was at the very beginning of the pandemic when no one was sure what to do or what was going to happen. At the time this was filmed we were allowed to sail but not go ashore, this was what we were told by officials at the customs office. Since then that has changed greatly. We respect their decisions to keep their country safe.

The post [Ep. 22] Is it OVER? – Stopped by POLICE While Sailing in BVI appeared first on Sailing Sweet Ruca.

0:00 Intro

0:36 Bahamas Sailing

We raise our anchor at the deserted island in North Eleuthera Bahamas and head west. We sail through the crystal clear but shallow water of the Bahama Banks to Chub Cay, Whale Key, Bimini, and then on to Miami.

3:49 Gulf Stream Crossing

We crossed the gulf stream with a northeast wind, perfect for some downwind spinnaker sailing on the way to Miami and Biscayne Bay. We hit 10.9 knots of boat speed during some great and fun sailing conditions.

7:00 Stiltsville

We entered Biscayne National Park through the Stiltsville Cut. It was pretty cool to sail between the old houses and buildings on stilts, which have been long since abandoned. This is a tricky entrance and we must be careful as we draw over six feet.

7:25 Coconut Grove Sailing Club

We got the last open mooring ball at CGSG, which thankfully was the only one that would fit our 46 foot sailboat. We were very thankful for the clubs hospitality. What an amazing place with excellent staff and friendly members. It helped that they were a racing club and we had visited there before while racing Melges 24’s.

7:41 Sail Loft

One of the main reasons for coming to Miami was to get our staysail fixed up. When it was originally re-cut down from a #4 jib in Annapolis the sail loft there made a mistake and made the sail longer than the hoist. So we were able to have the sail re-recut and fixed in under a week. We were super thankful to get this done.

8:39 Melges 20 and Bacardi Winter Series in Miami

It just so happened that the Melges 20 Winter Series and Bacardi Miami Winter Series was going on. Was this planned? Well, it certainly was a good enough reason to sail back to the USA and see all of our racing friends. On top of that, the race committee boat broke down, so we volunteered to be the RC boat for the day. It was lots of fun, but there were a few close calls. Luckily no boats were harmed in the filming of this video and SV Sweet Ruca came away without a scratch in her Awlgrip!

12:52 Coconut Grove

We ended our time in Miami with a stroll through Coconut Grove. It is a lovely little suburb on the south side. We took advantage of this time to get our last meals out in the USA for what we be a long time. We were also invited to go to the CGSC staff Christmas party, so we celebrated the holiday in style with our new friends before we sail away again to the Bahamas.

#sailing #boatlife #bahamas #sail #sea #boat #yacht #sailboat #yachting #travel #ocean #sailor #yachtlife #boating #boats #sailingboat #sailingyacht #adventure #yachts #vlogger #youtubesailing #vlog #rescuedog #sailingdog #boatdog #snorkeling #paddleboarding #desertedisland #jboats #saltydog #saltlife #sailingvlog #liveaboardlifestyle #rocna #anchoring #cruising #sailaway

The post [Ep 15] Hard Decisions…Do We Turn Around? appeared first on Sailing Sweet Ruca.

We are sailing offshore from Cape Fear North Carolina, across the gulf stream, directly to the Bahamas. 0:32: Catch a Mahi Mahi Usually, we bring our fishing gear in at night, but this night, we forgot to. Fish On! We reel in a Mahi Mahi in the dark while going 9 knots under sail. Kate fries him up and we have a delicious fresh fish meal.

2:47 Offshore Sailing

We keep on trucking! We are almost to the Bahamas. We can feel things getting warmer, which is much needed. We needed shorts weather, rather than the nasty cold of the East Coast in November. Luckily we didn’t have to dodge any storms or hurricanes, but we did sail through some winds up to 35 knots on the way down, making for an exciting sailboat passage.

9:31 Arrive in Eleuthera

We made it to Eleuthera, the Bahamas after almost a year of hard boat work. It seems like everything is coming together. We navigate the shallow waters, dodging coral heads, on the way to Meeks Island (one of the Bahamas Pig Islands) in the crystal clear turquoise waters of the Bahamas.

10:53 Anchor Down

This is what we went sailing for. Dropping anchor in the Bahamas and cooking some steaks on the grill! Yes! Watch a beautiful sunset with us.

12:04 Good Morning

We wake up in the morning and Kate climbs the mast to get the lay of the land. What other girls would do a mast climb? Kate is a superwoman! The water is glass calm and beautiful clouds dot the horizon. We jump in and dive our Rocna 33kg anchor to see how it is set!

15:02 Paddle Boarding

It is time for some paddle boarding and to explore a beach at a deserted island in the Caribbean! Woo Hoo!!! We made it.

#sailingvlog #bahamas #gulfstream #sailing #atlantic #bahamas #caribbean #sail #sailinglife #sail #sea #boat #yacht #sailboat #yachting #travel #ocean #boatlife #sailor #yachtlife #boating #summer #boats #sailingboat #sailingyacht #adventure #yachts #vlogger #youtubesailing #vlog #rescuedog #sailingdog #boatdog #snorkeling #paddleboarding #desertedisland #jboats #saltydog #saltlife

The post [Ep 14] Gulf Stream Crossing p2 – Sailing Offshore to Bahamas: Land Ho! appeared first on Sailing Sweet Ruca.

Kate gives a detailed explanation of how the rudder bearings work, and why we are changing them out.

1:47 Gooping

This is a really big project, including lots of fiberglass work and “gooping”. Meaning, it’s messy! We use lots of different glues and sealants as we time-lapse the rudder bearings back in the boat. We also add an extra fiberglass layer, with the help of Beasley Marine making them extra secure offshore. https://www.beasleymarine.me/ – Their website is lame, but their composite work and knowledge are top-notch. If you need composite, fiberglass repair, or carbon fiber work done on the east coast, Mike Beasley and his experienced team are highly recommended!

2:47 Rudder Installation

We slide the rudder back up into the boat. Carefully aligning it. We narrowly miss the wind generator with the travel lift as we maneuver the boat over the rudder. The rudder quadrant, steering cables, and autopilot are bolted in and tested.

5:38 Roxy the Sailing Dog Meets a Deer

We took Roxy for a walk in the local park. She saw a deer for the first time. She was a bit confused, and we think she thought it was another large dog that she could play with. It was really funny watching her try to jump and play with the whitetail deer.

6:15 Mast Mods and Installation

We modified the carbon fiber mast and rig to include a removable Dyneema inner forestay. This would allow us to have a cutter rig when we wished, and change back to a sloop as needed. A staysail jib which will also double as our storm headsail is hanked on and flies in high winds, or with double headsails when reaching. Once again, we enlisted the professionals at Beasley Marine for this composite work.

7:43 Back Together and In the Water

We finally get the boat back together and the travel lift comes to launch the boat on a cold November day. Thanksgiving is approaching as we prep for our next ocean sailing passage.

10:03 Tech Talk

We take a few moments to talk about how all the boat work we did in the yard has held up over the last 4000 miles as we have sailed to the Bahamas, USVI, BVI, Grenada & West Indies. We touch on the rudder bearings, carbon fiber mast, LifePO4 batteries, solar panels, boat life, and more.

#sailingvlog #annapolis #sail #sailing #sailinglife #sail #sea #boat #yacht #sailboat #yachting #travel #ocean #boatlife #sailor #yachtlife #boating #summer #boats #sailingboat #sailingyacht #adventure #yachts #vlogger #youtubesailing #vlog #rescuedog #sailingdog #boatdog

The post [Ep. 12] Back Together appeared first on Sailing Sweet Ruca.

0:23 Boatyard Fire

There is a fire in the boatyard, just one row upwind from our boat. It was a potentially dangerous situation that our friend Brian on the boat next to us noticed first and sprung into immediate action. We were working on our electrical system and could smell that it was an electrical type of fire. Worried that it was us we quickly shut everything down on our boat and gave it a full inspection. It was on another boat, but it is a sad story. The owner of the boat had been preparing his yacht for a circumnavigation for five years. He was due to finish and launch this winter. Errant current in an undersized solar panel wire likely caused the fire based on our visual inspection. The good of the story, fellow liveaboard cruisers in the marina saved the day, and likely the boatyard with their quick response.

0:53 Trip Home

We ran a few errands in Annapolis before heading home. We had to drop off our mainsail and #4 jib at the sailmaker to have an additional reef installed, reinforcements put on, and cut down the #4 to a storm staysail which would hank on our to-be-installed removable inner forestay. First, we had to return our borrowed jeep to our new friend and fellow Annapolis boater and boatyard neighbor Eric. Thank you!!!!! Then we picked up our rental car to make the 1000 mile road trip back to Toledo Ohio to see family and go to the Chicago Mackinac Awards party.

2:35 Chicago-Mackinac Race Finish

A short clip of the finish of the 333 mile long 2019 Chicago to Mackinac Race. In July, we sailed aboard Jim Weyand’s 1D35 Turbo sailboat Chico 2, hailing from Bayview Yacht Club in Detroit, MI. Kate was a driver and I was the navigator. For more about our experience on the race, see the link to our blog: https://sweetruca.com/routing-for-the…

4:26 Chicago-Mackinac Trophy

We traveled to Chicago to attend the awards party for the race in November at the Chicago Yacht Club. We were very happy to meet up with our friends from the Chico 2 crew and accept the 100+ year old Chicago-Mackinac Trophy along with the rest of the team. There just aren’t enough good things to say about Jim and his team of amazing sailors. Official results: https://cycracetomackinac.com/results…

5:38 Mast Removal

Our time in Chicago and home with friends was awesome, but now we had to shift modes from vacation and party mode back into boatyard work mode. We were doing some major re-fit work to our monohull sailboat in preparation of further offshore voyaging. First up was removing the carbon fiber mast and rig to install the Dyneema inner forestay. This would allow us to shift between a sloop and cutter rig as needed. It would also centralize the sail plan in big breeze if we were to encounter a storm in the ocean.

9:19 Rudder Removal

Next up was removing the rudder. We had decided to replace the rudder bearings. Ours were serviceable as is, but knowing that we plan to put on 25000 miles, we found it prudent to do sooner rather than later. Bert Jabin Yacht Yard in Annapolis would make our work easier as well, rather than trying to do these major projects in a far-flung tropical island.

11:54 Rudder Bearing Replacement Part 1

After we had the rudder out, a major job requiring heavy machinery. It was time to remove the old bearings. They simply had to be pounded out. Before we install the new bearings, we first must change the bearing race on the rudder itself, from composite to stainless steel. This required quite a bit of cutting, grinding, and sanding. It is always nerve-wracking to cut into such expensive parts.

#sailingvlog #CYCRTM #sail #sailing #sailinglife #sail #sea #boat #yacht #sailboat #yachting #travel #ocean #boatlife #sailor #yachtlife #boating #summer #boats #sailingboat #sailingyacht #adventure #yachts #vlogger #youtubesailing #vlog

The post [Ep. 11] What Could Go Wrong? – Champagne Sailing, Parties & Boatyard Grit appeared first on Sailing Sweet Ruca.